Product Downloads

Quick Cure Two-Component Polyurethane Foam

Applies to Product ID# TF605 and TF205 Portable Spray Foam Insulation Systems By Commercial Thermal Solutions, Inc.

Approvals and Standards

ODP (Ozone-Depletion Potential): Contains non-ozone-depleting, non-flammable HFC Propellant. VOC Content: Contains no VOC’s, according to currently accepted definitions.

“Class 2” – material which will achieve a Flame Spread of 75 or less and a Smoke Developed rating of 450 or less when tested according to ASTM E-84. DIN 4102-1 is a common European fire standard for building materials.

Tiger Foam package is patented under U.S. patent.

Tiger Foam conforms to international guidelines for protection of the ozone layer and with respect to the Montreal Protocol of 1987 and other environmental guidelines.

Applications

Spray foam onto any dry, clean surface in any direction to seal, insulate, or fill voids, reduce vibration or deaden sound. This product will adhere to practically any substrate except Teflon®, oily surfaces, greases, polypropylene, polyethylene, silicone, seals, mold release agents & similar materials. Protect surfaces not to be foamed. Always read all safety data sheets and operating instructions including use of proper personal protective equipment prior to use.

Product Description

Tiger Foam Quick Cure foam insulation is a multipurpose, two-part, closed-cell polyurethane formula. The packaging, delivery system, and components were designed to be user- and environmentally friendly. These systems are both portable and disposable. They are completely self-contained to provide flexibility in end use performance.

Properties

Two-part foam systems will begin to expand immediately upon chemical reaction of the “A” component (a polymeric isocyanate) and “B” component (a polyol blended with proprietary additive ratios) chemicals to a volume that is 3-5 times the dispensed volume, depending on ambient conditions. The foam will cure to semi-rigid, closed-cell foam. Optimum application temperature of the chemicals in the tanks is 75° F (24° C) to 85° F (34° C) and may be sprayed onto colder or warmer substrates, with slight effects on the foam’s characteristics. Cured foam is resistant to heat and cold -200° F to +240° F (-129° C to +116° C). It is also resistant to negative effects of aging. It is not resistant to UV light and must be painted, coated, or covered if exposed to direct sunlight after application.

Cured polyurethane foam is chemically inert and non-reactive in approved applications, and will not harm electrical wire insulations, Romex®, rubber, PVC, polyethylene (i.e., PEX) or other plastic. It is approved for use around wires, plumbing penetrations, etc., and contains no formaldehyde. Tiger Foam creates a tight seal that insulates and protects against dust, air infiltration, pests, and sound.

Special Features

Cleanable tips (use Acetone)
Metered spray gun
Tiger Foam systems do not require outside electrical or mechanical power source.