Fast Rise, Fire Rated Surface Spray
- Product Overview
- Operating Instructions
- Material Safety Data Sheet “A” Component
- Material Safety Data Sheet “B” Component
- Cured Foam MSDS
- Technical Data Sheet
- Application Tips
- Calculating How Much to Order
- Architect/Designer Product Handbook
E-84 Fire-Rated SPF CLASS 1 SPRAY FOAM SYSTEM
(Fast Rise Polyurethane Foam)
Applies to Product ID# TF600FR and TF200FR Portable Spray Foam Insulation Systems By Commercial Thermal Solutions, Inc.
Approvals and Standards
ASTM E-84 Class 1 Approval
ICC Report #ESR-3183
ODP (Ozone-Depletion Potential): Contains non-ozone-depleting, non-flammable HFC Propellant.
Tiger Foam conforms to international guidelines for protection of the ozone layer and with respect to the Montreal Protocol of 1987 and other environmental guidelines.
VOC Content: Contains no VOC’s, according to currently accepted definitions.
Spray foam onto any dry, clean surface in any direction; even to the underside of a floor or roof deck. This product will adhere to practically any substrate except Teflon®, oily surfaces, greases, polypropylene, polyethylene, silicone, seals, mold release agents & similar materials. It is especially critical where flame-retardant specifications require E-84 Class 1 foam. Protect surfaces not to be foamed. Always read all safety data sheets and operating instructions including use of proper personal protective equipment prior to use. Based on the manufacturer’s Human Health Risk Assessment, we recommend a minimum of one hour for safe re-occupancy time for homeowner’s.
Please consult Commercial Thermal Solutions Product Management Department for details (800-664-0063).
Tiger Foam E-84 Class 1 Fire-Rated foam insulation is a multipurpose, two-part, closed-cell polyurethane formula specifically manufactured for fire retardancy. The packaging, delivery system, and components were designed to be user- and environmentally friendly. These systems are both portable and disposable. They are completely self-contained to provide flexibility in end use performance. Tiger Foam E84 Fire-Rated SPF Class 1 Spray Foam can assist in attaining LEED and/ or ENERGY STAR® Certification.
Two-part foam systems will begin to expand immediately upon chemical reaction of the “A” component (a polymeric isocyanate) and “B” component (a polyol blended with proprietary additive ratios) chemicals to a volume that is 3-5 times the dispensed volume, depending on ambient conditions. The foam will cure to semi-rigid, closed-cell foam. Optimum application temperature of the chemicals in the tanks is 75° F (24° C) to 85° F (34° C) and may be sprayed onto colder or warmer substrates, with slight effects on the foam’s characteristics. Cured foam is resistant to heat and cold -200° F to +240° F (-129° C to +116° C). It is also resistant to negative effects of aging. It is not resistant to UV light and must be painted, coated, or covered if exposed to direct sunlight after application.
Cured polyurethane foam is chemically inert and non-reactive in approved applications, and will not harm electrical wire insulations, Romex®, rubber, PVC, polyethylene (i.e., PEX) or other plastic. It is approved for use around wires, plumbing penetrations, etc., and contains no formaldehyde. Tiger Foam creates a tight seal that insulates and protects against dust, air infiltration, pests, and sound.
Cleanable tips (use Acetone)
Metered spray gun
Tiger Foam systems do not require outside electrical or mechanical power source.